Ikyo
Mar 10, 10:21 PM
I might head over. Let me know how the line is later in the day. I wonder when Walmart are going to sell theirs.
SeattleMoose
Mar 17, 02:04 PM
I've been using Aperture 3.0 since 3.0.1 came out. This is FAR from "beta" quality software. It's rock solid on my 250GB+ Aperture library.
Yes, some folks have had problems, but that's to be expected; this is software, and software will always have bugs. The bugs were neither egregious nor wide-spread (although to hear the kvetching you'd think that every Aperture user had their photo libraries replaced with goat se pics and emailed to their coworkers).
The much less vocal majority have been using Aperture 3 for a while now and are getting a heck of a lot of use out of it.
Another +1.....loving it and zero problems here.:D
Yes, some folks have had problems, but that's to be expected; this is software, and software will always have bugs. The bugs were neither egregious nor wide-spread (although to hear the kvetching you'd think that every Aperture user had their photo libraries replaced with goat se pics and emailed to their coworkers).
The much less vocal majority have been using Aperture 3 for a while now and are getting a heck of a lot of use out of it.
Another +1.....loving it and zero problems here.:D
aptmunich
Dec 20, 08:33 AM
I got the LaCie Porsche design 16x dual layer burner (couldn't get the regular LaCie over here and it was cheaper...) and it works really well!
spicyapple
Oct 20, 09:59 PM
http://att.macrumors.com/contest/50F1FE.jpg
One word: anachronistic
a video version of generations coming soon. :)
One word: anachronistic
a video version of generations coming soon. :)
more...
moonislune
Sep 21, 03:32 PM
Umm you can't use a digital camera with iChat? This makes no sense :confused: ....................
I've used a digital camera that supported the webcam function with ichatusb, and it makes sense from a cost perspective.
I've used a digital camera that supported the webcam function with ichatusb, and it makes sense from a cost perspective.
jph.daulte
Feb 15, 09:58 AM
I have upgrade my iBook OS, from OS922 to 10.3.8.
(iBook G3 800 MHz, 384 Mb SDRAM, HD 40Gb, ADSL256)
Before I erased all data on my hard disk to zero. Clean installation also.
After that, as a result, I have a corrupted display and a freezed iBook!
(see attached...)
BUT, if I boot the iBook without extensions, (safe boot),
it's ok....
I have no ideas how to solve this bug. I tried to re install twice, no more success... I run Disk Utility, TechToolsPro, DiskWarrior, nothing special...
I think to understand a System log could help.
What does <The "HasShadow" window property is obsolete> mean?
How, and where learn to use those system log?
I usually manage well my troobleshootings, but I'm not at all experienced in Unix, BSD, and System log.
Here is a part of last System log
Feb 15 08:08:04 localhost SystemStarter: Bienvenue sur Macintosh.
Feb 15 08:08:04 localhost SystemStarter: D?marrage extensions d?sactiv?es
Feb 15 08:08:05 localhost ConsoleMessage: Starting Apple Multicast DNS Responder
Feb 15 08:08:05 localhost ConsoleMessage: Starting SecurityServer
Feb 15 08:08:05 localhost ConsoleMessage: Starting timed execution services
Feb 15 08:08:05 localhost ConsoleMessage: Starting kernel event agent
Feb 15 08:08:05 localhost SystemStarter: D?marrage du r?pondeur DNS multi-diffusion Apple
Feb 15 08:08:05 localhost ConsoleMessage: Initializing network
Feb 15 08:08:05 localhost mDNSResponder[154]: mDNSResponder-58.8 (Apr 24 2004 20:38:40) starting
Feb 15 08:08:07 localhost SystemStarter: Starting SecurityServer
Feb 15 08:08:07 localhost SystemStarter: D?marrage des services ? ex?cution diff?r?e
Feb 15 08:08:07 localhost SystemStarter: D?marrage de l?agent d??v?nement du kernel
Feb 15 08:08:07 localhost SystemStarter: Initialisation du r?seau
Feb 15 08:08:11 localhost kernel: ATY,Bee_A: vram [9c000000:02000000]
Feb 15 08:08:11 localhost kernel: ATY,Bee_B: vram [98000000:02000000]
Feb 15 08:08:11 localhost SystemStarter: The "HasShadow" window property is obsolete. Use CGSSetWindowShadowAndRimParameters(cid, wid, 0.0,0.0, 0,0, CGSNoShadowStyle) to turn off the window shadow instead. Set a break-point on CGSLogMessage to find out where this property is set.
Is ATY the culprit? But how to debug this?
Regards
jph.daulte
(iBook G3 800 MHz, 384 Mb SDRAM, HD 40Gb, ADSL256)
Before I erased all data on my hard disk to zero. Clean installation also.
After that, as a result, I have a corrupted display and a freezed iBook!
(see attached...)
BUT, if I boot the iBook without extensions, (safe boot),
it's ok....
I have no ideas how to solve this bug. I tried to re install twice, no more success... I run Disk Utility, TechToolsPro, DiskWarrior, nothing special...
I think to understand a System log could help.
What does <The "HasShadow" window property is obsolete> mean?
How, and where learn to use those system log?
I usually manage well my troobleshootings, but I'm not at all experienced in Unix, BSD, and System log.
Here is a part of last System log
Feb 15 08:08:04 localhost SystemStarter: Bienvenue sur Macintosh.
Feb 15 08:08:04 localhost SystemStarter: D?marrage extensions d?sactiv?es
Feb 15 08:08:05 localhost ConsoleMessage: Starting Apple Multicast DNS Responder
Feb 15 08:08:05 localhost ConsoleMessage: Starting SecurityServer
Feb 15 08:08:05 localhost ConsoleMessage: Starting timed execution services
Feb 15 08:08:05 localhost ConsoleMessage: Starting kernel event agent
Feb 15 08:08:05 localhost SystemStarter: D?marrage du r?pondeur DNS multi-diffusion Apple
Feb 15 08:08:05 localhost ConsoleMessage: Initializing network
Feb 15 08:08:05 localhost mDNSResponder[154]: mDNSResponder-58.8 (Apr 24 2004 20:38:40) starting
Feb 15 08:08:07 localhost SystemStarter: Starting SecurityServer
Feb 15 08:08:07 localhost SystemStarter: D?marrage des services ? ex?cution diff?r?e
Feb 15 08:08:07 localhost SystemStarter: D?marrage de l?agent d??v?nement du kernel
Feb 15 08:08:07 localhost SystemStarter: Initialisation du r?seau
Feb 15 08:08:11 localhost kernel: ATY,Bee_A: vram [9c000000:02000000]
Feb 15 08:08:11 localhost kernel: ATY,Bee_B: vram [98000000:02000000]
Feb 15 08:08:11 localhost SystemStarter: The "HasShadow" window property is obsolete. Use CGSSetWindowShadowAndRimParameters(cid, wid, 0.0,0.0, 0,0, CGSNoShadowStyle) to turn off the window shadow instead. Set a break-point on CGSLogMessage to find out where this property is set.
Is ATY the culprit? But how to debug this?
Regards
jph.daulte
more...
Tiptizzle
May 5, 11:49 AM
I'd love to see an end to this question. With every new firmware release this question is posted. Can I still restore to the previous firmware since a new firmware came out today?
Well, why don't YOU try it and find out the answer to that question?
The worst that will happen is you will be denied the restore to that firmware if you don't have an SHSH on file for it already.
This isn't rocket science. The slightest bit of research would turn up this information.
Maybe they are not at a computer where they can try?
Well, why don't YOU try it and find out the answer to that question?
The worst that will happen is you will be denied the restore to that firmware if you don't have an SHSH on file for it already.
This isn't rocket science. The slightest bit of research would turn up this information.
Maybe they are not at a computer where they can try?
ridli
Jan 17, 09:30 AM
Dignity not included.
more...
Encai
Apr 1, 05:44 PM
Hellhammer, just wanted to say thanks for creating the guide! It was very clear and easy for me to follow when I recently upgraded to Snow Leopard.
xStep
Apr 4, 07:12 PM
rustywild sent me a private message and this is my response to that.
I only slept 4 hours last night so I might still be misunderstanding. Part of your explanation didn't make any sense given your code.
This is what I believe you have�
A dictionary where the keys will be the left most component that sets up what the right side component should display. The keys are placed into a sorted array. Each time component 0 changes, you want to update the right side component. Each time a choice is made, you want it reflected in two labels. The following code should do that for you. This is untested code.
- (void)pickerView:(UIPickerView *)pickerView didSelectRow:(NSInteger)row inComponent:(NSInteger)component
{
if (component == kPotenciaComponent) {
NSString *selectedState = [self.potencia objectAtIndex:row];
// Update values array for key of component 0.
[self.cantidad release];
self.cantidad = [potenciavoltaje objectForKey:selectedState];
[pickerView reloadAllComponents]; // Might not need to load all, but I do.
[pickerView selectRow: row inComponent: kPotenciaComponent animated: YES];
[pickerView selectRow: 0 inComponent: kCantidadComponent animated: YES];
label1.text = [self.potencia objectAtIndex:row];
label2.text = [self.cantidad objectAtIndex: 0];
}
else {
label2.text = [self.cantidad objectAtIndex: row];
}
}
The labels are updated here because that is when the change is occurring in your selection. You may also want to set them when you first setup your two data arrays in your viewDidLoad method.
P.S. Looks like you are a native Spanish speaker. Welcome to the challenge of communicating technical problems in another language. :)
I only slept 4 hours last night so I might still be misunderstanding. Part of your explanation didn't make any sense given your code.
This is what I believe you have�
A dictionary where the keys will be the left most component that sets up what the right side component should display. The keys are placed into a sorted array. Each time component 0 changes, you want to update the right side component. Each time a choice is made, you want it reflected in two labels. The following code should do that for you. This is untested code.
- (void)pickerView:(UIPickerView *)pickerView didSelectRow:(NSInteger)row inComponent:(NSInteger)component
{
if (component == kPotenciaComponent) {
NSString *selectedState = [self.potencia objectAtIndex:row];
// Update values array for key of component 0.
[self.cantidad release];
self.cantidad = [potenciavoltaje objectForKey:selectedState];
[pickerView reloadAllComponents]; // Might not need to load all, but I do.
[pickerView selectRow: row inComponent: kPotenciaComponent animated: YES];
[pickerView selectRow: 0 inComponent: kCantidadComponent animated: YES];
label1.text = [self.potencia objectAtIndex:row];
label2.text = [self.cantidad objectAtIndex: 0];
}
else {
label2.text = [self.cantidad objectAtIndex: row];
}
}
The labels are updated here because that is when the change is occurring in your selection. You may also want to set them when you first setup your two data arrays in your viewDidLoad method.
P.S. Looks like you are a native Spanish speaker. Welcome to the challenge of communicating technical problems in another language. :)
more...
Peter.Howard
Jan 19, 03:33 AM
Keep it and enjoy using it.
playing the old games etc
playing the old games etc
iDisk
Jul 23, 12:08 PM
Anyword on the "rumored" marble interface that was reported awhile back?
more...
pagansoul
Oct 5, 11:31 AM
I want the wood ones. What are they?
You will find them here.
http://www.designboom.com/contest/view.php?contest_pk=25&item_pk=25202&p=1
You will find them here.
http://www.designboom.com/contest/view.php?contest_pk=25&item_pk=25202&p=1
MacRumorUser
Mar 20, 12:15 PM
A brash thing to say! I'm expecting this to be an inch shy of perfect now.
You should know - nothing is perfect. To expect as much will only lead to dissapointment. ;)
You should know - nothing is perfect. To expect as much will only lead to dissapointment. ;)
more...
emw
Jul 5, 01:06 PM
Sounds like an interesting compression technology. I ordered the white paper so I'll post if there's anything interesting. At first, I thought it was a "new and improved" JPEG, but it's just a way of compressing the JPEG images into a .sit file. Still interesting, but not quite as much so.
iJoe
Feb 9, 01:53 PM
Processor: bus speed I originally had this, but couldn't find it for every model. I'll try and add it.
Memory: how many open slots I was considering doing another 'Upgrade Guide', but perhaps one great big one would be best...
HD: speed of HD Something I got rid of purely because I couldn't find the speed of the Mac mini's (is it that bad? Again, I'll try...
Optical: speed of Superdrive *adds to list*
Display: external monitor spanning vs. mirroring Is this really needed, as you can usually hack it anyway.
Price: US$ as well *cough*
Ports: PowerBooks have a PC card slot; also maybe a separate category for audio to do list.
Notes: maybe make a separate box for "Last Updated" good idea.
...enter the specs you want (i.e. combo drive, FW800, USB2, 128 MB Vram), and then it would give you the various machines that can be configured that way, with prices... I was planning on doing something similar eventually. Maybe the ability to turn columns or rows on and off.
How about having a seperate BTO column, instead of cramming it in with the standard config? What are your thoughts on that?
Memory: how many open slots I was considering doing another 'Upgrade Guide', but perhaps one great big one would be best...
HD: speed of HD Something I got rid of purely because I couldn't find the speed of the Mac mini's (is it that bad? Again, I'll try...
Optical: speed of Superdrive *adds to list*
Display: external monitor spanning vs. mirroring Is this really needed, as you can usually hack it anyway.
Price: US$ as well *cough*
Ports: PowerBooks have a PC card slot; also maybe a separate category for audio to do list.
Notes: maybe make a separate box for "Last Updated" good idea.
...enter the specs you want (i.e. combo drive, FW800, USB2, 128 MB Vram), and then it would give you the various machines that can be configured that way, with prices... I was planning on doing something similar eventually. Maybe the ability to turn columns or rows on and off.
How about having a seperate BTO column, instead of cramming it in with the standard config? What are your thoughts on that?
more...
TomH TX
Apr 9, 12:14 PM
Try going into parallels settings and increasing the ram allocated to the virtual machine to at least 3gigs. That is what I had to do. Hope that helps. :)
OrangeSVTguy
Apr 19, 07:57 AM
Wont the OS 'be PPC', preventing it from booting on intel hardware, and also devoid of drivers? I know the apps included on OS X are UBs, but isn't the 'core' either PPC or x86?
Intel can boot from a GUID(intel) or Apple Partition Map-APM(PPC). Leopard is also universal as it contains all files for both PPC and x86 Macs. All Snow Leopard was basically a stripped down version of Leopard, just removed all PPC support.
I removed a hard drive from my G5 and had it in a USB enclosure and it booted just fine on my 2009 Mac Mini. I was running 10.5.8 even though my Mini shipped with 10.6.
Intel can boot from a GUID(intel) or Apple Partition Map-APM(PPC). Leopard is also universal as it contains all files for both PPC and x86 Macs. All Snow Leopard was basically a stripped down version of Leopard, just removed all PPC support.
I removed a hard drive from my G5 and had it in a USB enclosure and it booted just fine on my 2009 Mac Mini. I was running 10.5.8 even though my Mini shipped with 10.6.
walterwhite
Apr 25, 02:30 PM
The VCR's from the late 80's like the AG-1960, 1970, 1980 are all very affordable and are the professional decks... they are like $75 on ebay(used to sell for $1500+). Then get an older miniDV that has passthrough (about 60-100$). There is a list of them around on the internet... this also gives you the ability to pull data off of miniDV tapes, if you have them. if you dont have MiniDV tapes... get a analog to digital converter.. about $150 from elgato or others.
chown33
Apr 23, 06:53 PM
Thanks! Your answer helped. So now I know that <**> are only for system provided classes. I used quotes for Fraction.h and it worked.
The example that I used had everything dumped in the main .m file along with the main function.
I'm glad you got it working, but please be specific in the future about what you did, and what the book told you to do. Accuracy is important in programming. Books are specific about what to do because the author knows what works and what doesn't, and has given accurate instructions on what to do that works.
If you're working from a book, and they show you what to put into a file, you should put exactly that into a file. So if your book showed you to put everything dumped into the main.m file, then that's what you should do.
However, if they showed you something else, then dumping everything into a single main.m file is asking for trouble, because you don't know all the consequences of what you're doing.
If the book showed "Fraction.h", then that's what you should use. If they showed <Fraction.h> and it didn't work, then that's an error in the book.
Do not make changes to what a book tells you unless you fully understand what the consequences are. And if you're a beginner, then almost by definition, a beginner does not fully understand all the consequences. If you did understand all the consequences, you wouldn't be a beginner.
The example that I used had everything dumped in the main .m file along with the main function.
I'm glad you got it working, but please be specific in the future about what you did, and what the book told you to do. Accuracy is important in programming. Books are specific about what to do because the author knows what works and what doesn't, and has given accurate instructions on what to do that works.
If you're working from a book, and they show you what to put into a file, you should put exactly that into a file. So if your book showed you to put everything dumped into the main.m file, then that's what you should do.
However, if they showed you something else, then dumping everything into a single main.m file is asking for trouble, because you don't know all the consequences of what you're doing.
If the book showed "Fraction.h", then that's what you should use. If they showed <Fraction.h> and it didn't work, then that's an error in the book.
Do not make changes to what a book tells you unless you fully understand what the consequences are. And if you're a beginner, then almost by definition, a beginner does not fully understand all the consequences. If you did understand all the consequences, you wouldn't be a beginner.
jondob
May 4, 10:26 PM
It seems now it wont take the cd at all... When I restart I do hear the drive kinda setting back in place but the cd doesn't even go in it now...
I burned a DVD today but now its not even taking the cd in...
What should I do
I burned a DVD today but now its not even taking the cd in...
What should I do
iDisk
Jul 23, 12:08 PM
Anyword on the "rumored" marble interface that was reported awhile back?
adcx64
Apr 28, 05:09 PM
Did you zap the NVRam or PRAM.
Supersonic
Apr 27, 03:10 AM
Did/Does it have the same done case with the metal arm, or are we talking something completely different?
No comments:
Post a Comment